Sugar Soap
Intended Use
A concentrated sugar soap in liquid form. It is especially formulated to clean and prepare surfaces for repainting. For this purpose shake the bottle well and add 125mls to 1 gallon (4.5 litres) of water in a large bucket and stir. Apply to the surface with a cloth or sponge. Rinse with clean water and allow to dry before repainting.
It can also be used for general household cleaning, painted walls, tiles and bath etc. For this purpose shake the bottle well and add 50mls to 1 gallon
(4.5 litres) of water in a large bucket, and stir. Apply as for instructions given above.
Composition
A dispersion of mixed inorganic silicates, wetting agents and a yellow dye in water.
Properties
Appearance Yellow opalescent liquid
Health Hazards
The product is not classified under the Classification, Packing and Labelling of Dangerous Substances Regulations 1984.
Precautions in Handling and Use
Avoid contact with the skin and eyes. Wear appropriate gloves and eye protection to BS 2092. Keep containers closed except when in use.
First Aid Procedure
Skin Contact:
Wash skin thoroughly with soap and water, or use proprietary skin cleaner. Do not use solvents.
Eye Contact:
Irrigate immediately with plenty of clean, fresh water, holding eyelids apart.
Ingestion
There is no hazard by this route in normal industrial practice. If accidentally swallowed, DO NOT INDUCE VOMITING. Keep at rest and obtain medical attention. In all cases of doubt, or where symptoms persist, seek medical attention.
Transport Classification
Non-hazardous.
Storage
Store in a cool, dry place. Keep out of reach of children.
Fire Prevention
Non applicable
Fire Fighting
Will burn to produce dense black harmful smoke. Cool containers exposed to fire with water spray.
Spillage
Contain and collect spillage with non-combustible absorbent materials, e.g sand or earth.
Disposal
Waste materials must be disposed of in accordance with the Control of Pollution act 1974. Do not allow to enter drains, water courses, water supplies, ponds, rivers, etc.
Technical Advisory Service
Our Research and Development Department provides a free consultancy and advisory service. The information contained in this Technical Data Sheet is based on many years experience and usage of the product. However, all recommendations and suggestions are made without guarantee since the conditions of use are beyond our control.
For further technical advice contact the Technical Advisory Service at the address below.